GM5BW97333A【PDF 12/15 页】LED WHITE 11500K 20MA 3.2V PLCC4

Sheet No.: DG-089015B

Preliminary

GM5BW9733xA (Series)

?SPAN class="pst GM5BW97333A_2656847_3">Manufacturing Guidelines

?SPAN class="pst GM5BW97333A_2656847_3">Storage and Handling

1. Moisture-proofing: These parts are shipped in vacuum-sealed bags to keep them dry and ready for use.

See Fig. 17.

2. Store these parts between 5癈 and 30癈, at a relative humidity of less than 70%; for no more than one year

from the production date.

3. After breaking the package seal, maintain the environment within 5癈 to 30癈, at a relative humidity of less than

60%. Solder the parts within 3 days.

4. If the parts will not be used immediately, repack them in a dry box, or re-vacuum-seal them with a desiccant.

5. If the parts are exposed to air for more than 3 days, or if the silica gel telltale indicates moisture contamination,

bake the parts:

"When in the tape carrier, bake them at a temperature of 95癈 to 100癈, for 16 to 24 hours.

"When loose or on a PCB, bake them at a temperature of 110癈 to 120癈, for 8 to 12 hours.

"Note that the reels may become distorted if they are in a stack when baking. Confirm that the parts have cooled

to room temperature after baking.

?SPAN class="pst GM5BW97333A_2656847_3">Cleaning Instructions

1. Sharp does not recommend cleaning printed circuit boards containing this device, or cleaning this device with

ultrasonic methods. Process chemicals will affect the structural and optical characteristics of this device.

2. Sharp recommends the use of a solder paste that does not require cleaning.

Fig. 17 Factory Moisture-proof Packing

Aluminum

bag

Silica gel

Reel

Label

(EIAJ-compliant)

Label

发布紧急采购，3分钟左右您将得到回复。

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购